This series of dryers is composed of a combination of suction dryers and cold dryers, integrating the respective advantages of suction dryers and cold dryers. Through reasonable pipeline connections and capacity matching, the advantages of the two are maximized to achieve economic operation points and high-quality low dew point finished gas.
Technical parameters Rated intake temperature: ≤ 45 ℃
Rated working pressure: 0.7Mpa (0.4-1.0Mpa allowed) Orders below 4.5Mpa are accepted
Environmental temperature: air-cooled type: ≥ 2 ℃, ≤ 38 ℃
Water cooled type: ≥ 2 ℃, ≤ 45 ℃
Pressure dew point: -40 ℃ (0.7Mpa)
Regeneration method: LXG type: no heat regeneration
LMG type: micro thermal regeneration
Control method: individual control or online control
Regenerated gas consumption: 3% rated processing capacity
Adsorbent: Activated alumina
Intake oil content: ＜ 0.1mg/m3
Installation method: Indoor, without foundation, concrete floor leveling.
Technical parameters:
